As before you need to install the update and then select features in “Turn Windows features on or off”.

Download from here

How to use Group Policy to turn off the Backup Notification in the Windows 7 Actions Center

Check out his blog too while you’re at it.

Scenario:
Trying to create a shortcut to a fixed drive letter using Group Policy Preference that points to a location on the network. After login there is no shortcut created and if you look in eventlog you see an error “0×80070002 The system cannot find the file specified”. If you run GPupdate /Force the shortcut is created.

This is an issue where it’s trying to create the shortcut before the drive’s are connected and Windows can’t create new shortcuts to locations not connected.

Workarounds:

1. Create the shortcut using UNC-path
2. Create the drives and shortcuts using logonscript
3. Create a scheduled task (using GPP) to run GPupdate after user logon or use logonscript to run GPupdate

Hope someone benefits from this information.

When you do a settings report of a GPO which contains references to an adm-template (not admx-template) and for some reason this adm-template doesn’t exist in the default paths anymore (you may have cleaned them out) you get “Extra registry settings” in the report instead to show these settings.

http://support.microsoft.com/default.aspx?scid=KB;EN-US;981704

Of course the better way is to convert the adm-template to an admx-template instead and use the central store!

Microsoft has released a hotfix

Error message occurs when you use GPMC to view a software restriction Group Policy setting in Windows 7 and in Windows Server 2008 R2: “An error has occurred while collecting data for Software Restriction Policies”
http://support.microsoft.com/kb/981750

If you haven’t copied them from your Windows Server 2008 to SYSVOL for management download this package and move it into SYSVOL for all your administrators.

Instructions and everyhing is on the download page which you find here

These Starter GPO’s are recommended settings for Windows XP and Windows Vista. It contains Settings for “Specialized Security— Limited Functionality (SSLF)” and “Enterprise Client (EC)”.

Of course you need RSAT to manage these Starter GPO’s

Download them here

Don’t forget to install Service Pack 1 for Vista first (it’s mandatory).

Windows Vista Service Pack 1

RSAT for Windows Vista x86

RSAT for Windows Vista x64

Knowledgebase Article

They are now here for XP, Server 2003 and Vista

Download:

Group Policy Preference Client Side Extensions for Windows XP (KB943729)
Group Policy Preference Client Side Extensions for Windows XP x64 Edition (KB943729)
Group Policy Preference Client Side Extensions for Windows Vista (KB943729)
Group Policy Preference Client Side Extensions for Windows Vista x64 Edition (KB943729)
Group Policy Preference Client Side Extensions for Windows Server 2003 (KB943729)
Group Policy Preference Client Side Extensions for Windows Server 2003 x64 Edition (KB943729)

This file contains all Group Policy settings since Windows 2000 so this is the only file you need. For Windows Server 2008 24 new settings are available where 12 of them are for Terminal Services functionallity.

This reference file is also for the new admx/adml-format so to know for sure you can use settings described in this file you need to start using Windows Vista or Windows Server 2008 to configure your GPO’s.

Download the new reference file here (xls and xlsx file available)

Even if it’s only Tuesday this must be selected as funniest this week.

Opening the Windows Vista box

I still can’t understand what they where thinking about when they wrote this!

• Advanced Group Policy Management (AGPM) Overview
• Group Policy Preferences Overview

AGPM is a tool included in the Microsoft Desktop Optimization Pack which can only be aquired if you have a Software Assurance license with MS.
Read more about AGPM here
Download the Whitepaper here

The new Group Policy Preference Whitepaper is a new document released for Windows Server 2008 which gives you some information on how to handle Group Policy in a different way. You sure will not get disappointed if you read this document and haven’t looked to far into Group Policy in Windows Server 2008, I think you will download and test right away
Download it here

At first I wasn’t sure why but then I could see that this package also includes all language files for the admx-files which will make it easier if you have people in different countries all creating GPO’s and they want to create them in their own language. So it’s much easier way to collect the adml-files rater than needing to install different Vista’s just to get the adml-files.

Download the files from here: http://www.microsoft.com/downloads/details.aspx?FamilyID=05d0598b-95f9-4bdd-af36-b365d68ec5f6&DisplayLang=en

The answer is that it won’t install on a localized version but you can install it on an English Windows XP and then transfer the files to your localized version and then run it. The files are located at %ProgramFiles%\GPDBPA\

They don’t guarantee success but you might want to try it (in LAB-environment first of course).

This is to include all events etc. for troubleshooting problems with Group Policy.

Here you will find the information: http://technet2.microsoft.com/windowsserver2008/en/library/e695eea4-01c4-429e-8fd1-c98e3ef6f7791033.mspx

First a print screen of the program:

Until today I have only run the program on two domain controllers so I haven’t really tested the tool completely but I have found some parts which you might find interesting.

First of all you should check the page named Critical Issues of course.
For me I got two errors here when I tried on my DC.

1. Incorrect permissions on Default Domain Controller Policy
2. DFS service not running on [MACHINE]

About the first error it complained about “Enterprise Domain Controllers” security group didn’t have the “Apply Group Policy” access which was correct so I now recieved this information and could open GPMC and correct the error.

Second error I’m a bit confused about since on Windows 2003 (and earlier) normally don’t have DFS running (if you don’t configure it of course). It’s using FRS for replication of SYSVOL and not DFS. I think this is a mistake from MS because I suspect the tool also has been designed with Windows Server 2008 kept in mind since it’s using DFS-R and not FRS and I think that’s why it’s watching the status of this service.

If you continue at “All Issues” you can find even more information. Some parts are information and some parts errors. I got a lot of errors which I don’t really understand. For example it complained about that:

• I’m not using Roaming profiles!?!?
• Offline Files disabled using reg-key (on a Domain Controller)!?!?
• It complained that two out of four of my group policies (which affects my DC’s) had their user settings disabled!?!?

However the tool has also “Tree reports” which tells you a lot about your GPO’s so if you know what you are doing you can find some useful information about your GPO’s in this tool instead of searching for it using AdsiEdit for example.

As conclusion you can say that the tool has some improvements that need to be done before you can fully benefit from it but it’s a great start if you aren’t using anything today and I would recommend everyone to check it out and at least see if it tells you if you have any errors.

There are some other tools available on the market which you might want to check you if you don’t find this tool useful enough. You can find links on the Group Policy homepage

This is because in the white paper you can read the following: “Administrators requested features in Group Policy that simplify policy management. To do this, the service pack will uninstall the Group Policy Management Console (GPMC) and GPEdit.msc will edit local Group Policy by default. In the SP1 timeframe, administrators can download an out-of-band release that will give them the ability to add comments to Group Policy Objects (GPOs) or individual settings and search for specific settings.”

This means that when you install SP1 you will no longer have GPMC installed on your computer and you should install the new enhanced edition of GPMC that will be available for download.

There is a small catch. If you install the SP1 now you will have GPMC removed and there is no GPMC-version available for download so then you need to: “Beta testers will find that after installing Windows Vista SP1, they no longer have access to GPMC, and that the new, enhanced version of GPMC has not yet been released. In this case, administrators can continue to edit Group Policy by opening a remote desktop session directly to the server or to a PC running the release to manufacturing (RTM) version of Windows Vista.” as written on Windows Vista Blog

They wrote about this on Betanews.com and on this site they have some parts completely wrong and instead of me writing about it you can read some parts from it on Darren Mar-Elia’s Blog which I find amusing.

In my personal mind I think it was the best to remove GPMC for a number of reasons since on most of the computers you wouldn’t need it, you can get very far using only gpedit.msc and rsop.msc and you should risk having users that could do own things with the tool, like for example create a backup of all your GPO’s etc.

Lets also hope the new enhanced version is as good as the existing one!

Download Windows Vista Service Pack 1 White paper

Windows Vista and Windows Server 2008: These has it as default that you can configure wireless policys using GPO so nothing needs to be done.

Windows 2003: Depending on which level of servicepack you have installed you might need to install “Wi-Fi Protected Access (WPA) support for Wireless Network (IEEE 802.11) Policies is available for Windows Server 2003″. Note that this will not let you configure WPA2 wireless policys. You will need Windows Vista och Windows Server 2008 for that.

Windows XP: First requirement is that you need to have Windows Server 2003 AD Schema in your AD. Second requirement is that you need atleast SP1 for XP.
From you Windows 2003 server (located at C:\Windows\System32) copy the files wlsnp.dll, wlstore.dll and ws03res.dll. Then register wlsnp.dll using “regsvr32 wlsnp.dll”.
Now this has registrered a new snap-in for Wireless Network Policy.
Side-note: For Windows XP to be able to process WPA2 policys you will need to install “Update for Windows XP (KB917021)”

Windows 2000: Sorry, no can do…

Whenever you do any setting in a GPO you can add on a Comment in the new Comment page writing whatever you like. This is stored in the GPO so you will always have it for reference for further use later or any other purpose you might have.

These comments you write will of course print out on your reports created from GPMC, which I think is a very nice feature added.

Comments are stored at \\ad.domain.com\SYSVOL\ad.domain.com\policies\{GUID}\[MACHINE]/[USER]\comment.cmtx which is of course an XML file containing all your comments of settings in the GPO.

Using comments for your settings might make your life easier but remember that they wont show up if you are still using XP!

.

As you can see in printscreen StarterGPOs have their own location in GPMC where you create your starters like any other GPO. Just right click and select New, Select a name and maybe a comment about this Starter and of you go.
When you open the Editor you will see that you only have Administrative Templates which is the only thing you can configure in these Starters. Software Settings and Windows Settings are excluded.
 

StarterGPO’s isn’t located in the same place as normal GPO’s.
A normal GPO would be in \\ad.domain.com\SYSVOL\ad.domain.com\Policies\ but a StarterGPO is located in \\ad.domain.com\SYSVOL\ad.domain.com\StarterGPOs but it’s still defined with a GUID

If you open one of these folders you wont find any GPT.ini file as normal when you have a GPO, instead you will find a StarterGPO.tmplx which is some sort of XML-file defining the Starter.